modemy

From: atlas (ovahalik@atlas.cz)
Date: 08. 12. 2002, 15:44 CET


Ahoj,

    narazil jsem na problem s modemem (). Podari se pripojit, ale
spojeni, az nespadne, je nefunkcni, ("Stranku neni mozne zobrazit
...).
Kdyz jsem se dival do logu, je tam:

Conexant SoftK56 Data,Fax,TAM Voice in use.
Modem type: Conexant SoftK56 Data,Fax,TAM Voice
Modem inf path: S215CMX.INF
Modem inf section: HSFModem1
115200,N,8,1
115200,N,8,1
Initializing modem.
Send: AT<cr>
Recv: AT<cr>
Recv: <cr><lf>OK<cr><lf>
Interpreted response: Ok
Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
Recv: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
Recv: <cr><lf>OK<cr><lf>
Interpreted response: Ok
Send: ATS7=60L0M1+ES=3,0,2;+DS=3;+IFC=2,2;X3<cr>
Recv: <cr><lf>OK<cr><lf>
Interpreted response: Ok
Dialing.
Send: ATDT#########<cr>
Recv: <cr><lf>+MCR: V90<cr><lf>
Interpreted response: Informative
Recv: <cr><lf>+MRR: 54667<cr><lf>
Interpreted response: Informative
Recv: <cr><lf>+ER: LAPM<cr><lf>
Interpreted response: Informative
Recv: <cr><lf>+DR: V42B<cr><lf>
Interpreted response: Informative
Recv: <cr><lf>CONNECT 115200<cr><lf>
Interpreted response: Connect
Connection established at 54667bps.
Error-control on.

Na jinem, fungujicim pocitaci, je log
Rockwell External V.90 K56 Voice Modem in use.
Modem type: Rockwell External V.90 K56 Voice Modem
Modem inf path: ROCKWE~1.INF
Modem inf section: Install1
115200,N,8,1
115200,N,8,1
Initializing modem.
Send: AT<cr>
Recv: AT<cr>
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: OK
Interpreted response: Ok
Send: AT&FE0V1&C1&D2S95=45S0=0<cr>
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: AT&FE0V1&C1&D2S95=45S0=0<cr>
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: OK
Interpreted response: Ok
Send: ATS7=60S30=0L1M0\N3%C3&K3BN1X3<cr>
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: OK
Interpreted response: Ok
Dialing.
Send: ATDT#########<cr>
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: CARRIER 50667
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: PROTOCOL: LAP-M
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: COMPRESSION: V.42BIS
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: <cr>
Interpreted response: Informative
Recv: <lf>
Interpreted response: Informative
Recv: CONNECT 50667
Interpreted response: Connect
Connection established at 50667bps.
Error-control on.

atd.

Rozdily vidim. ale nejsem schopen poznat, proc jsou jake jsou. Dival
jsem se na nastveni u obou, ale nic jsem nenasel.
Ten nefunkcni pocitac jsem kamaradovi daval do pohybu, ctyri mesice
slapal, nikdo s tim nic nedelal, vsechno samo.
Najde se nejaky dobrak, ktery se v tom vyzna a pomuze?
Dekuji predem, omlouvam se za delsi mail.

Oldrich



This archive was generated by hypermail 2.1.2 : 08. 12. 2002, 15:47 CET